INDUSTRIAL VACUUM CLEANER MODEL VACPRO 56 M ATEX 3D for metal chips, fine dust and liquids
INDUSTRIAL VACUUM CLEANER MODEL VACPRO 56 for metal chips, fine dust and liquids
INDUSTRIAL VACUUM CLEANER MODEL VACPRO 76 for metal chips, fine dust and liquids
Industrial vacuum cleaner VacPro 56 M Atex 3D, 5,5 kW, 400 V three phase, 50 cycles, suction inlet DN 100
for dust dangerous to health with AGW values ≥ 0,1 mg/m³ with refeeding of the clean air to the working room as well as for inflammable dusts of all dust explosion classes in Zone 22, minimum inflammation energy of dust >1 mJ, inflammation temperature +200°C = max. surface temperature +125°C, (ignition-source free design). No ignition sources must be vacuumed! Unit according to German regulation EN 60335-2-69, dust class M and design 22. Design/documentation according to Atex 95 (regulation 94/9 EC), marking CE Ex II 3D-IP65 T125°C.
Description
Industrial vacuum cleaner VacPro 56 M Atex 3D, 5,5 kW, 400 V three phase, 50 cycles, suction inlet DN 100
for dust dangerous to health with AGW values ≥ 0,1 mg/m³ with refeeding of the clean air to the working room as well as for inflammable dusts of all dust explosion classes in Zone 22, minimum inflammation energy of dust >1 mJ, inflammation temperature +200°C = max. surface temperature +125°C, (ignition-source free design). No ignition sources must be vacuumed! Unit according to German regulation EN 60335-2-69, dust class M and design 22. Design/documentation according to Atex 95 (regulation 94/9 EC), marking CE Ex II 3D-IP65 T125°C.
With optional equipments:
Transport/discharge handle for collection container, transport and discharge by crane
Shaped PE-bags (50 pcs.)
With basic set of suction tools DN 60:
Connecting piece MV 100/60 K, steel, zinc coated
Suction hose, rubber 05UG, electrically conductive, with steel wire insert and connections, 5 m long, DN 60 (suitable for heavy and abrasive material)
or
Plastic hose 05SE, electrically conductive, with connection pieces, 5 m long, DN 60 (suitable for light material, standard dust)
Suction tube 1b, aluminium, 1 m long, DN 60
Floor cleaning nozzle, 300 S, 300 mm wide, DN 60
Flat nozzle 6 a, metal, zinc coated, DN 60
Bowed pipe 3 a, 30°, steel, zinc coated, DN 60
Standard equipment:
- Side channel vacuum pump 400 V, 50 cycles, protection class IP65
- Protective motor switch IP65, 4 m flexible cable, CEE-plug 5-pole (3+PE+N) 32 A with phase inverter, protection class IP67
- Suction inlet DN 100
- Return check valve
- Exhaust air silencer
- Maintenance free mechanical separator (relieves main filter)
- Pocket filter (main filter), polyester needle felt, according to dust class M (EN 60335-2-69)
- Pneumatic AirShock®-filter cleaning device (no local compressed air required)
- Vacuum limiter
- Blind plug with chain
- Vacuum gauge for filter condition monitoring
- Electrically conductive connection of all components among each other
- Lifting/lowering device for the container
- Interchangeable 80-l-collection container with wheels and handle
- Undercarriage, 2 easy running wheels Ø 250 mm, 2 castor wheels Ø 100 mm with stop device
- Tool box
- Epoxy powder coated, paint blue (RAL 5015)
Specifications:
| Description | Unit | VacPro 56 M Atex 3D three phase |
| Driving power | kW | 5,5 |
| Middle power consumption | kW | 3,6 |
| Maximum airflow | m³/h | 520 |
| Maximum vacuum (vacuum pump) | mbar | 440 |
| Maximum vacuum (with vacuum limiter) | mbar | 280 |
| Suction inlet, mm Ø | mm | 100 |
| Capacity of container | litres | 80 |
| Main filter area | cm² | 20000 |
| Dimensions (L x W x H) | mm | 1260 x 720 x 1560 |
| Weight, approx. | kg | 191 |
| Voltage | Volt | 400 |
| Mains prefuse | Amp. | 32 |
| Sound level, reflection-free* DIN 45635 | dB (A) | 69 |
* with 5 m suction hose DN 100
Included in our scope of supply is an operation and maintenance manual as well as machine labels in English language. Technical specification and prices subject to change without prior notice.
